Removable adhesive vinyl - 3M IJ40


  • Availability:In Stock
  • Brand: roll_material
  • Product Code: Roll Material

3M IJ40C-20 white, opaque, matte, permanent adhesive (grey) with Controltac™ and Comply™.


Product Features
• Includes Comply™ Adhesive for fast, easy bubble-free installations

• Pressure-activated adhesive for easy sliding, tacking, snap up and repositioning

• Removable with heat from most surfaces within the expected performance life

• Expected Performance Life (unwarranted period of time)

        -Most General Signage: 7 years in a vertical exposure with typical usage.

        - Indoor Floor Graphics: 1 year when used in a horizontal indoor exposure with typical usage and protected by 3M™ Scotchcal™ Luster Over laminate 3645

        - Indoor Floor and Carpet Graphics: 3 months when used in a horizontal indoor exposure with typical usage and protected by  

  • 3M™ Scotchcal™ Luster Over laminate 8509
  • 3M™ Envision™ Matte Over laminate 8050M


Recommended Types of Graphics and End Uses

  • General intermediate signage for outdoor and indoor applications
  • Interior and exterior building windows and dividers
  • Indoor floor and carpet graphics
  • Truck graphics on flat or simple curved areas
  • Partial vehicle wraps on flat or simple curved areas


IMPORTANT NOTE
Floor and carpet graphics are for use on indoor floors only.
They require the use of 3M™ Scotchcal™ Overlaminates 3645, 8509, or 3M™ Envision™ Matte Overlaminate 8050M which provides a slip-resistant surface .

When applying graphics to carpet, it is solely the user’s responsibility to be aware of and comply with the Americans with Disabilities Act Standards for Accessible Design, which includes, but is not limited to

Carpet or carpet tile shall be securely attached and shall have a firm cushion, pad, or backing or no cushion or pad. Carpet or carpet tile shall have a level loop, textured loop, level cut pile, or level cut/uncut pile texture. Pile height shall be 1/2 inch (13 mm) maximum. Exposed edges of carpet shall be fastened to floor surfaces and shall have trim on the entire length of the exposed edge.

CAUTION

Loose or damaged floor or carpet graphics may cause a person to slip or trip and fall.
To reduce the risk of slipping or tripping on floor graphics:

  • Use only 3M over laminate 3645, 8509, or 8050M which has a slip-resistant surface
  • Properly apply graphics only on hard indoor floors or carpets with a pile as described in ADA Standards for Accessible Design,
  • Immediately remove or replace loose or damaged graphics. Do not attempt to repair or re-adhere

Failure to heed this Caution may result in personal injury.








Adhesive Color
Clear, Gray
Adhesive Controltac/Comply
Controltac™ and Comply™
Application
Buildings & Walls, Cars & Vans, Displays, Floors, Floors & Sidewalks, Labels, Opaque Signs, Other Signs (Opaque Signs), Trucks and trailers, Vehicles & Transportation, Walls, Windows, Windows & Glass
Application Surface
Flat, Simple curves
Application Temperature (Celsius)
+10°C minimum (air and substrate)
Brand
Controltac™
Color Name
Clear, White
Color Palette
Transparent, White
Core Size (Imperial)
3 in, 6 in
Film Type
Calendered
Imaging Method
Digital Print
Max. Durability
7 years
Opacity
Opaque, Transparent